Top of the page

DWX-W WET MILLING MAINTENANCE KIT

Item No. DWX-W-MAINT-K
DGSHAPE wants to make sure your device is operating at top performance. The following steps will guide you through the necessary steps to get your DWX-42W Filter Maintenance If the device has not been in use, we recommend replacing the filters. Coolant Tank Please clean the coolant tank and refill
Price $399.95
excl. tax
Out of stock

Description

DGSHAPE wants to make sure your device is operating at top performance.

The following steps will guide you through the necessary steps to get your DWX-42W

  • Filter Maintenance
If the device has not been in use, we recommend replacing the filters.
  • Coolant Tank
Please clean the coolant tank and refill it with distilled water and corresponding additives, per proportions dictated on page 61 of the User's Manual
  • Internal Cleaning
Perform a complete cleaning of the tools, calibration pin and the internal cavity and components of the mill
  • Collet Maintenance
Perform a collet inspection and maintenance
  • Spindle Run-In
Finally, perform a Spindle Run-In (long)
Items Included in the Kit:

  • ZCH-250D (Chelating Agent)
  • ZAW-1000D (Coolant Additive)
  • ZF2-CLD2 (GEN II Coolant Tank Filter, 2-pk)
  • ZF2-CLDC (End-Caps for GEN II Filters, 2-pk)
  • 1000013791 (Grease, Collet)
Please reference User's Manual ​


Reviews (0)

There are no reviews yet.

DWX-W WET MILLING MAINTENANCE KIT

Item No. DWX-W-MAINT-K
DGSHAPE wants to make sure your device is operating at top performance. The following steps will guide you through the necessary steps to get your DWX-42W Filter Maintenance If the device has not been in use, we recommend replacing the filters. Coolant Tank Please clean the coolant tank and refill
Price $399.95
excl. tax
Out of stock

Description

DGSHAPE wants to make sure your device is operating at top performance.

The following steps will guide you through the necessary steps to get your DWX-42W

  • Filter Maintenance
If the device has not been in use, we recommend replacing the filters.
  • Coolant Tank
Please clean the coolant tank and refill it with distilled water and corresponding additives, per proportions dictated on page 61 of the User's Manual
  • Internal Cleaning
Perform a complete cleaning of the tools, calibration pin and the internal cavity and components of the mill
  • Collet Maintenance
Perform a collet inspection and maintenance
  • Spindle Run-In
Finally, perform a Spindle Run-In (long)
Items Included in the Kit:

  • ZCH-250D (Chelating Agent)
  • ZAW-1000D (Coolant Additive)
  • ZF2-CLD2 (GEN II Coolant Tank Filter, 2-pk)
  • ZF2-CLDC (End-Caps for GEN II Filters, 2-pk)
  • 1000013791 (Grease, Collet)
Please reference User's Manual ​


Reviews (0)

There are no reviews yet.